The repellent anti-graffiti water based permanent coating system is revolutionary in the sense that for the first time ever, a service is available to the public where the cycle of unwanted graffiti is broken.

A permanent, preventative system for the eradication of unwanted graffiti now exists. This; also includes a safe water based graffiti removal system as well. Unwanted graffiti will be quickly and economically removed because of the preventative nature of the repellent coatings, any new unwanted graffiti will be quickly and economically removed within 24hrs upon discovery, while still maintaining it's protective coating against future taggings.

  Masonry blocks, pre-cast cement walls, bricks, 
  wood, metal or any painted surface may be 
  protected with this preventative repellent coating. 

The repellent coating system has three stages; 
    A) Primer-Sealer to cover up unwanted graffiti. 
        (bricks may be stripped than clear sealed) 
    B) Repellent Top Coat that is colour matched to  
         surface in question 
    C) Clear Repellent Coat is applied as more 
         protection against  unwanted graffiti. 

  All three phases of the special repellent coating  process will probably need two to three coats  each, totaling between 6 to 9 coats upon final  completion for both interior and exterior  applications. 

Future unwanted graffiti taggings cease to occur  due to the three (3) strike preventive process; 

1. Repellent: paint does not adhere well, drips,  and discourages future graffiti application. 
2. Preventive: Surfaces are colour match to  original colours, thus leaving one with the experience of having no effect on the wall or surface, hence breaking the graffiti cycle.
3. Follow-up: 24 hr. service to remove any new graffiti, hence again stopping the graffiti cycle.